Heath Electric · Electrical contractor The one who quotes it is the one who wires it.

Panel upgrades, EV chargers, lighting, repairs and renovation wiring, handled by one electrician from the first call to the final walkthrough. A written quote before any work starts, and a typed panel directory when the job is done.

Build your quote Awaiting: phone number
  • 1electrician, start to finish
  • Quotein writing before work starts
  • Typedpanel directory on every job

01 Services

Flip the breakers for the work you need.

Each breaker is a service. Switch on everything on your list and it goes straight into your quote request, so the first conversation starts with the right details.

Heath Electric Panel directory
All circuits off

Flip a breaker on to add it to your quote.

Go to the quote form

An electrician working inside an open residential breaker panel Stock photo

Circuit 01

Panel upgrades & replacements

Moving from 100 A to 200 A, replacing an old fuse box or a panel your insurer has flagged, or adding a sub-panel for a basement, garage or addition.

  • Load check on what your home draws today and what you plan to add
  • Coordination with your utility for the disconnect and reconnect
  • New breakers, a tidy panel and a typed directory

Good to know: panel replacements always need an ESA permit and inspection. You'll know what your job needs before you agree to anything.

02 Our work

Before. After. Drag to see the difference.

Heath Electric's own before and after photos are on the way. The pair below is a stand-in to show how this will work.

Filler photos: awaiting Heath Electric's before & after shots
Before: a rusted old breaker box on a peeling wall After: a neat row of new white breakers with wiring dressed along the rails Before After
The job Job description, location and what was done will appear here with each of Heath Electric's photos.

Recent jobs

  • Awaiting photo

    Panel upgrade

  • Awaiting photo

    EV charger install

  • Awaiting photo

    Kitchen pot lights

  • Awaiting photo

    Basement rough-in

  • Awaiting photo

    Outlets & GFCIs

  • Awaiting photo

    Exterior lighting

03 How it works

From first call to final walkthrough.

  1. Step 1

    Tell us the job

    Send the form or call. A photo of your panel and the area you want work done in answers half the questions before anyone visits.

  2. Step 2

    Site visit & written quote

    A look at the panel, the route the wires will take and what your home already draws. You get the scope, the price and the timing in writing.

  3. Step 3

    The work

    ESA permit filed and inspection booked where the job needs it. Floors covered, power off only as long as it has to be, and the same electrician on site throughout.

  4. Step 4

    Test, label, walk through

    Every new circuit tested, the panel directory typed up, the work area cleaned, and a walkthrough so you know what was done and where.

04 Safety

Something wrong right now? Start here.

General safety guidance for common problems. If anyone is in danger, call 911.

Pick what you're seeing for the first steps to take, how urgent it is, and a one-tap message to send with the details filled in.

Awaiting photo: the electrician behind Heath Electric

05 About

One electrician. Start to finish.

Heath Electric is an independent electrical contractor. The person who quotes your job is the person who does it: no hand-offs, no crew you've never met, and one number to call if you ever have a question about the work.

That's the whole idea behind the company. Clear quotes, clean work, every circuit tested and labelled, and a panel the next person can read at a glance.

Licence
Awaiting: licence number
Insurance
Awaiting: insurance details
Service area
Awaiting: service area

06 FAQ

Questions people ask before they call.

Does my electrical job need a permit?

Most electrical work in Ontario has to be filed with the Electrical Safety Authority (ESA) and inspected, from new circuits to panel changes. A licensed electrical contractor files the notification for you. Your written quote will say whether your job needs one.

Can my panel handle an EV charger?

Often, yes. It depends on your service size (commonly 100 A or 200 A) and what your home already draws. A load calculation answers it properly. If the panel is close to its limit, a load management device can sometimes avoid a full upgrade.

Why does my breaker keep tripping?

Usually one of three things: too much plugged into one circuit, a short in a cord, device or the wiring itself, or a ground fault. If it trips again with everything on that circuit unplugged, leave it off. That points to a wiring fault that needs an electrician.

Should I replace an old fuse box or knob-and-tube wiring?

Many home insurers ask about fuse panels, knob-and-tube and aluminum wiring when you buy or renew a policy, and some won't cover a home until they're dealt with. An inspection gives you a written answer on what's there and what it would take to replace.

How do I get a quote?

Switch on the services you need in the panel above, then send the quote form with a short description. Photos of your panel and the work area help. You'll get a written quote before any work starts.

What areas does Heath Electric serve?

Awaiting: service area

07 Get a quote

Tell us about the job.

A written quote comes before any work starts. The more detail you send, the more accurate it will be.

  • PhoneAwaiting: phone number
  • EmailAwaiting: email
  • HoursAwaiting: hours
  • AreaAwaiting: service area

What happens next

  1. A reply to talk through the job and ask for any photos.
  2. A site visit if the job needs one, to see the panel and the route.
  3. A written quote with scope, price and timing before any work starts.
What do you need? (switch on as many as apply)

How soon?

Photos of your panel help. Once Heath Electric replies you can send them straight back.